Inspiration Rendition: Geometric Bangles

So here is the rendition of the geometric bangles from my previous inspiration post. If you would like to know how to make these yourself just continue reading.


MATERIALS NEEDED

1) 18ga non-tarnish gold brass artistic wire and silver plated artistic wire 
2) Ruler 
3) Side cutters
4) Flat nose pliers 
5) Nylon jaw flat nose pliers 
6) Round nose pliers 
7) Metal file
8) Craft wire multi mandrel (round, oval, square and triangle loops)
9) Chasing hammer
10) Utility bench block 
11) Bracelet mandrel or solid round cup/ container 

STEPS
1) Measure out 8” of non-tarnish wire and snip with side cutters
2) If wire has any kinks in it, just straighten them out with the nylon flat nose pliers
3) Using craft wire mandrel, wrap one end of the straightened wire around the shape/ size you want then remove from mandrel 
4) If during step 3 you create any kinks in the wire just straighten the wire back out with the nylon flat nose pliers – this step is really important and necessary before proceeding to step 5
5) Place bench block on a flat surface, place straightened shaped wire on bench block and using chasing hammer, hammer wire to flatten (this process will also harden the wire) – hammer along the entire length of the wire. If you want your bangle to be more on the wider side than the thinner side once done hammering one side, flip the wire over and hammer along the entire length of the opposite side
6) After hammering the wire, the shape created using the craft wire mandrel may come a bit loose, if so simply slide wire back on mandrel to reshape and remove 
7) Bend the wire around bracelet mandrel or whatever object you are using to form the bangle
8) Lightly tap wire into shape around object from step 7 using chasing hammer and remove
9) Using round nose pliers slightly round the opposite end of the wire (side without the shape) to form a hook

And there you have it, your customized geometric bangle.

FYI: I listed the metal file in case you have any rough edges on the wire after hammering. You may or may not use this tool but it’s good to have handy just in case.

Until next time, let inspiration find you!